API SPEC 15HR High-pressure Fiberglass Line Pipe standard history

API SPEC 15HR High-pressure Fiberglass Line Pipe standard history

API SPEC 15HR 3RD ED (2001) Specification for High-Pressure Fiberglass Line Pipe; Third Edition; Effective Date: August 1, 2016

API SPEC 15HR 3RD ED ADDENDUM1 (2004) ERRATA1 (2007) Addendum 1 and Errata 1; Specification for High-Pressure Fiberglass Line Pipe; Third Edition

API SPEC 15HR 4TH ED (2016) High-pressure Fiberglass Line Pipe; Fourth Edition; Effective Date: August 1, 2016

API SPEC 15HR 4TH ED (E1) High-pressure Fiberglass Line Pipe; Fourth Edition; Effective Date: August 1, 2016

API SPEC 15HR 4TH ED ERRATA1 (2016) Errata 1; High-pressure Fiberglass Line Pipe, Fourth Edition

API SPEC 15HR 3RD ED ADDENDUM1 (2004) ERRATA1 (2007) Addendum 1 and Errata 1; Specification for High Pressure Fiberglass Line Pipe; Third Edition

API SPEC 15HR 4TH ED ERRATA1 (2016) Errata 1; High-pressure Fiberglass Line Pipe, Fourth Edition

Amine epoxy GRE line pipe (design as per API-15HR)

  • Product scope:

1、 Diameter:DN40-DN600mm

2、 Pressure:PN1. 0-25Mpa Standards for implementation

1.API 15HR 2.API 15LR

3.SY/T 6267-2006 4.SY/T 6266-2004

  1. DN40-2
  • Temperature tolerance grade

1、Long-term service temperature of acid anhydride cured epoxy system

<65°C,Maximum temperature resistance80°C

2、 Long-term service temperature of aromatic amine cured epoxy system

<93. 3°C,Maximum temperature resistance135°C

  • Minimum Service Temperature of Epoxy Pipeline Products>_35°C

♦Product characteristics:

1、 Excellent corrosion resistance

2、 Good fatigue resistance, product design service life of 20 years

3、 High pressure and high safety factor

4、 Light weight, easy to install

5、 Good sealability in connection with steel pipe

6、 High, medium and low pressure grades meet the requirements of different media transportation

7、 The pipeline is not conductive (it can be designed as conductive product according to the engineering condition), the inner surface is smooth, the friction coefficient is small, and the fluid conveying efficiency is high.

 

  • The parameters are as follows
Serial No. DN Rated Pressure DNID Theory Theory DN Nominal Connection Type
Wall Thickness Length
(mm) (in) (Mpa) (mm) (mm) (mm) (m)
1 DN40 1 1/2 7 38.2 1.78 41.8 9.14 API Threaded Connection
2 8.5 38.2 1.78 41.8
3 10 38.2 2.04 42.3
4 12 38.2 2.48 43.2
5 14 38.2 2.92 44
6 16 38.2 3.38 45
7 18 38.2 3.86 45.9
8 20 38.2 4.34 46.9
9 22 38.2 4.85 47.9
10 25 38.2 5.63 49.5

API SPEC 15LR-2013 Low-pressure Fiberglass line Pipe

Organization: API
Publication Date: 1 August 2013
Status: Active
Page Count: 38
Scope:COVERAGE

This speciÞcation covers Þlament wound (FW) and centrifugally cast (CC) Þberglass line pipe and Þttings for pipe in diameters up to and including 24 in. in diameter and up to and including 1000 psig cyclic operating pressures. In addition, at the manufacturerÕs option, the pipe may also be rated for static operating pressures up to 1000 psig. It is recommended that the pipe and Þttings be purchased by cyclic pressure rating. The standard pressure ratings range from 150 psig to 300 psig in 50 psig increments, and from 300 psig to 1000 psig in 100 psig increments, based on either cyclic pressure (ref. 5.5.1) or static pressure (ref. 5.5.2). Quality control tests, hydrostatic mill tests, dimensions, weights, material properties, physical properties, and minimum performance requirements are included..

API SPEC 15LR-2013 Low-pressure-Fiberglass-Line-Pipe

API SPEC 15HR 2016 High-pressure Fiberglass Line Pipe standard

Organization: API
Publication Date: 1 February 2016
Status: Active
Page Count: 42
Scope:
Coverage

This specification was formulated to provide for the availability of safe, dimensionally, and functionally interchangeable high-pressure fiberglass line pipe with a pressure rating from 500 lbf/in.2 to 5000 lbf/in.2 (3.45 MPa to 34.5 MPa), inclusive, in 250 lbf/in.2 (1.72 MPa) increments for pipes ≤ than NPS 12 inches and 100 lbf/in.2 (0.69 MPa) increments for pipes ˃ than NPS 12 inches. This specification is limited to mechanical connections and the technical content provides requirements for performance, design, materials, tests and inspection, marking, handling, storing, and shipping. Critical components are items of equipment having requirements specified in this document.

This specification is applicable to rigid pipe components made from thermosetting resins and reinforced with glass fibers. Typical thermosetting resins are epoxy, polyester, vinyl ester, and phenolic. Thermoplastic resins are excluded from the scope of this specification. Any internal liners applied shall be made also from thermosetting resins. Fiberglass line pipe for use in low-pressure systems are covered in API Spec 15LR.

This specification covers fiberglass pipe utilized for the production of oil and gas. Specific equipment covered by this specification is high-pressure line pipe and couplings, fittings, flanges, and reducers and adapters.

API SPEC 15HR-2016 High-pressure-Fiberglass-Line-Pipe